Como Calibrar El Laser De Un Ps2 Slim

Como Calibrar El Laser De Un Ps2 Slim

Download ::: DOWNLOAD


Como Calibrar El Laser De Un Ps2 Slim

As for the drum size, lasers usually have one or two heads. The drum size can have an effect on how many pages you can print in a minute. Any laser is more expensive than a drum printer, but if you are not going to use a laser, don’t buy one. Make sure you get as many pages as you think you might need and you’ll be fine.

The quality of the laser is measured in dots per inch (dpi); that is, how many laser “spots” are in a given area. Its a good idea to be able to accurately calculate dpi; you might be surprised at how important the right dot will be to the overall result of your work. I started with an etch-rate of 30ppm, but more on that in a moment.

The companies involved in the most recent incarnations of our three relatively inexpensive laser light source technologies, the X3000i, the X1300i, and the Xerox C500, are the same – Xerox, Toshiba, Sharp, and Ricoh. Xerox has long been known for its output laser light technologies, particularly for the Xerox C70, the Xerox Docucenter and other models. For some reason, however, in the case of the X1300i and X3000i they selected Sharp, and not Ricoh as some of the other companies have in the past for their output technology.

If you are looking for laser light source projectors that are compact, rugged, and at low cost, you might be wondering what differences can you really expect between the X1300i and the X3000i. The answer is that you will likely not see a drastic difference in how the system performs, and you can usually expect the same performance that you got from the previous generation machine. For instance, the X1300i and the X3000i also appear to be using the same technology used in the C70.

With a laser capable of printing high yields of four or more pages per hour, it’s almost critical to regularly maintain the laser’s output to gain its full potential. Before you program a significant amount of printing, check that the machine is operating correctly and that the laser is calibrated.
Speaking of machine calibration, the laser should be checked for accuracy on a regular basis. To check the laser’s performance, make some test prints on plain paper. If the laser is operating correctly, the resulting print should be identical to that from the machine’s built-in CPLM (calibration pattern memory).
Few printers compare to laser printers when it comes to graphics, but the C500/DN is certainly no slouch. Indeed, its graphics capabilities are comparable to other laser printers, but they don’t approach those of dedicated graphics printers. Such a printer will have an input tray filled with special photo paper. This paper can be used to print photographs and other graphics. Unfortunately, such paper can be expensive, so you’ll want to use it sparingly. In addition to photos, you may want to print color graphics such as line drawings and bar graphs.
The Brother HL-L8360CDW is a $639 entry-level color laser printer that doesn’t include a toner cartridge. It uses a light-emitting diode (LED) array to deliver an advanced print speed of 23 pages per minute. The printer also enables you to print on both sides of the paper using a simple drop-in media tray.
If you’re looking for a fast (though limited-toner) laser printer that comes with a toner cartridge, check out the Editors’ Choice Brother HL-P7080CDN, a comparable entry-level model. It also includes an optional toner cartridge.

Leave a Reply